1. General Specifications:

• Type: Double Charge Vitrified Tiles
• Size: 600 x 600 mm (24 x 24 inches)
• Thickness: Generally between 9-12 mm
• Weight: Approximately 20-27 kg per tile, depending on the thickness

2. Material Composition:

• Base Material: High-quality clay, feldspar, quartz, and silica
• Surface Layer: Double layer of pigment and design material to create the pattern
• Finish: Polished/glossy/matt, depending on the requirement

3. Technical Specifications:

• Water Absorption: <0.05% (Highly water-resistant)
• Breaking Strength: > 700 N
• Surface Hardness: MOH's scale rating of 7 or more
• Chemical Resistance: Resistant to acids, alkalis, and household chemicals
• Stain Resistance: High resistance to stains
• Abrasion Resistance: PEI rating IV or V, suitable for high traffic areas

4. Physical Properties:

• Density: Approximately 2400-2500 kg/m³
• Flexural Strength: > 35 N/mm²
• Coefficient of Friction: 0.5 to 0.6 (for slip resistance)

5. Design and Appearance:

• Surface Pattern: Consistent design due to double charge technology, offering various patterns and colors
• Edge: Rectified (sharp edges for seamless joints) or non-rectified
• Gloss Level: High gloss, semi-gloss, or matte finish

6. Installation Specifications:

• Grouting: Minimum 2 mm grout joint recommended
• Adhesive: Use of suitable tile adhesive for vitrified tiles
• Substrate Preparation: Clean, level, and dry substrate necessary for installation

7. Packaging:

• Tiles per Box: Usually 4 tiles per box
• Coverage per Box: 1.44 square meters (approximately)
• Weight per Box: Approximately 32-36 kg

8. Compliance and Standards:

• ISO Certification: ISO 13006 / EN 14411
• Indian Standards: IS 15622:2017 (for ceramic tiles, including vitrified tiles)

9. Applications:

• Residential: Flooring and wall cladding for living rooms, kitchens, bathrooms, and bedrooms
• Commercial: Suitable for offices, malls, hotels, and other high traffic areas
• Outdoor Use: Can be used in balconies and terraces if proper installation and maintenance are ensured

10. Maintenance:

• Cleaning: Use neutral pH cleaners; avoid acidic or alkaline cleaners
• Polishing: Periodic polishing may be required for high gloss tiles to maintain shine
• Sealing: Not required due to low porosity, but grout lines may need periodic sealing